Necto 中国版

中国版免激活码。浏览器开启 Developer mode 并 Load unpacked Necto-Extension 文件夹。
如 360 报警请核对文件来源，只将 Necto 文件夹加入信任名单。

Necto 0.9.28

For x64 Windows 10 22H2 or Windows 11.
1. Extract the entire ZIP, then double-click Necto-Setup.cmd (not from inside the ZIP). If SmartScreen warns, first verify the download source.
2. Setup needs no WSL, Ubuntu or Docker and downloads nothing; no administrator rights or restart are needed. It asks for the folder Necto may use.
3. On first install: in chrome://extensions or edge://extensions, turn on Developer mode, click Load unpacked and select the folder Setup opens.
4. On an upgrade with the same existing Necto entry: click Reload on that entry; you do not need Load unpacked again. If Setup says automatic migration was not safe, follow its manual path prompt.
5. If the extension management card shows an old version after Reload, navigate again to chrome://extensions or edge://extensions and check the Necto card.

To remove Necto: double-click Necto-Uninstall.cmd (Setup also keeps a copy and tells you where).
ChatGPT (MCP) only, later: Enable-ChatGPT-MCP.cmd.

DeepSeek Web and ChatGPT Web do not require the Tunnel.
